Cabinet for Coverbind CPB1 Perfect Binder with Storage

The Coverbind CPB1 perfect binding machine is the ideal system for anyone who needs to bind top-quality perfect bound books quickly and efficiently, in a tabletop solution.

This fully automated perfect binding system fits conveniently on a tabletop, offering automatic pneumatic clamping, nipping, and exacting glue coverage for a secure bind.

This CPB1 perfect binder system lets you bind softback books easily with a simple to use control panel that lets you customize the machine to your specific job quickly.

Start binding books on-demand, the pneumatic powered clamping mechanisms automatically adjust to your book block thickness from two sheets of paper up to 2-1/4” thick.

The CPB1 is a production powerhouse able to bind up to 360 books per hour, depending on the book specifications and operator capabilities.

In addition to doing the binding, the CPB1 can also be used to make pads. Change-over between each binding and padding is completed with just the push of a button, so there is no downtime when job requirements change.

The CPB1 has a unique roughing blade that includes a serrated edge and notching pins allowing for binding strength with maximum glue penetration.

The dual glue application rollers make sure the glue is applied to all surfaces of the spine and the metering roller smooths out the glue to the desired thickness. There is a side glue wire attached to the glue application rollers that applies a bead of adhesive on one side of the book block.

Additionally, the unique action of the nipping table pushes glue to the front side of the book block providing strong adhesion of the cover to the book block.

Both the clamp and nipping table are pneumatic and operate with the compressor that is included with the system. The nipping table has an adjustable height and dwell time of up to 3 seconds. The nipper adjustment knob allows the operator to increase or decrease the travel of the nipper to produce an exceptionally square-backed book.

There are 3 important sensors on the machine. 1. The book clamp sensor will prevent the book clamp from closing without a book block in the machine.
2. The cover sensor will prevent to book block from moving across the gluing section and into the nipping table unless a cover is in place
3. The safety touch sensor on the top of the clamp, will automatically open the clamp if a hand is on the book clamp.

The exit tray provides a staging area for cover stock and an area to stack books as they come out of the machine. An optional stand with castors is available, making it easy to move around the shop where needed or out of the way when not in use.

Accomplish swift, simple, and automated binding for your perfect bound books with the Coverbind CPB1. An ideal perfect binding solution for in-plant and on-demand print shops and binderies.