Here is a transcript of this video: Ghent Enclosed Boards – Installation Video. Easy as 1-2-3. 1. Measure; 2. Screw; 3. Hang. Step 1: Determine location. Measure distance horizontally and vertically. Step 2: Pre-drill and screw. Don’t forget to plaster and paint over old screw holes. Use drill to insert screw, but not too tight. Extra space allows hangers to grab screw. Confirm screws are level. Step 3: Lift message center and affix screws to keyhole hangers. Easy enough for one person to install in three minutes. Ghent enclosed boards look nicer. Ghent enclosed boards perform better. Ghent enclosed boards last longer. For more information, contact your dealer.