We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
or check out these similar items that may be a good fit:
-
Luxor Endura 27" High Black 2-Shelf A/V Utility Cart with Cabinet
$328.33
- Molded plastic shelves and legs won't stain, scratch, dent, or rust.
- Locking door cabinet.
- 3-outlet, 15' UL listed power cord mounts in handle.
- Retaining lip around back and side of shelves for secure transporting.
-
GBC Locking Laminator Cabinet - 1154314
$1,328.00
- Shelf Width: 36"
- Shelf Depth: 18"
- Number of Shelves: 2
- Cabinet: Yes
-
-
Cabinet Stand for Revo-Office Laminator
$575.00
- For use with Revo-Office Laminator.
- With Hinged door.
- Keeps supplies and film conveniently stored.
- Quantity: 1
Stand For Fujipla ALM 3230 Laminator
- For Use With Fujipla ALM 3230 Laminator.
- Dimension(Assembled): 24" tall x 19" wide x 22" deep.
- Gray colored steel
- With Locking Roller Casters.
ProductDescription
Product Details
- For Use With Fujipla ALM 3230 Laminator.
- Dimension(Assembled): 24" tall x 19" wide x 22" deep.
- Color: Gray
- Material: Steel
- Weight is 48 lbs.
- With Locking Roller Casters.
Demonstration Video
Fujipla ALM 3230 Overview Video
The huge advantage to this machine is how simple it is to get a fully laminated and trimmed project without doing any of the cutting yourself.
Before we set up the machine, I’m going to turn it on, and place the waste bin below the catch tray.
On the main display we see some different settings to adjust, such as the temperature, which is easily adjusted.
Other settings include setting the number of pages to run, setting a lamination margin or have it trim right to the edge of your project, and a ...
This is the Fujipla ALM3230 Desktop Automatic Feed Laminator with an Integrated Trimmer!
The huge advantage to this machine is how simple it is to get a fully laminated and trimmed project without doing any of the cutting yourself.
Before we set up the machine, I’m going to turn it on, and place the waste bin below the catch tray.
On the main display we see some different settings to adjust, such as the temperature, which is easily adjusted.
Other settings include setting the number of pages to run, setting a lamination margin or have it trim right to the edge of your project, and a count of total projects and how much film a roll has.
Before lamination, make sure to close the rollers to the lamination position.
With the back cover open, now you’ll have to make some manual adjustments to the trimmer. This position is where it will cut the edges—it can be set for margins, or even through the project.
You’ll see some common sizes labeled for a cut with a margin, or a cut that trims at the edge of the project.
On the left is also a manual feed control, and a manual cutting control.
Back to the front, adjust the edge guides on the feed table for your project size. Do this on both sides.
Next, on the inside you can set project thickness with this little tab you move up or down—the normal paper thickness is labeled as such.
Before jumping into your real project, we recommend doing a test run. Push the table down, and insert your pages.
You’ll see it laminate and trim automatically. Where now you can evaluate if the measurements are equal and you can make any changes accordingly.
You’ll see I simply ran a test page with a margin, and one that is cut to the edge of the project.
If you need a micro adjustment, this little wheel moves the feed table from side to side in small increments.
Now I’m ready for my real project! And I can run up to a stack of 200 pages in one go. Can you imagine running a project of 200 pages, and never having to manually cut one yourself? It’s a huge time saver!
It can be place on any table, or you can purchase it’s own stand with extra room for the trimmings, and it adds a level of portability!
And that is the Fujipla ALM3230 Desktop Automatic Feed Laminator with an Integrated Trimmer!
